Weather, Moisture and Seasonal Problems
Visual problem library
Weather, Moisture and Seasonal Problems
Compare the photographs, then open the guide that matches your observation. A picture is a clue, not a confirmed diagnosis.

Photo credit and license
Compare what you see, then open the matching guide for inspection checks and a practical next step.
10 matching guides
Open a matching guide to see its photographs, checks and next steps.
No matching guides on this page. Try fewer words or search all 83 hive problems.
Compare several frames, colony history and test results. For suspected foulbrood, stop moving comb between colonies and contact your state apiary inspector.
Jump to a specific problem
Winter losses and a small winter cluster
No live cluster on a suitable check, very small population, dead bees on comb, or abandoned food.
Open the visual identification guideCondensation, dripping water and a wet cover
Drops under the lid, wet top bars, water stains or a damp cluster.
Open the visual identification guideMold on comb or woodenware
Fuzzy growth on unused comb, cover or box walls, often beside an area the bees no longer cover.
Monitor extent; investigate weakness and moisture
Mold grows where damp surfaces are poorly occupied. It may follow colony decline and does not alone establish the cause.
Compare additional reference photographs
Compare visible fungal growth with naturally dark comb, pollen and propolis. Mold can develop after a colony weakens or dies; it may not be the original cause. Open The BeeMD reference for mold (new tab).
Recognize the signs
Fuzzy growth on unused comb, cover or box walls, often beside an area the bees no longer cover.
What else can look similar?
Wax moth webbing is silk and may contain tunnels or larvae; chalkbrood makes individual larval mummies.
Inspect and confirm
Use gloves, a light and camera. Locate growth, live bees and brood; trace moisture and inspect for suspicious larval remains before moving comb.
Separate damp stored equipment from dry stock.
Take action
- Separate damp stored equipment from dry stock.
- Repair water entry and match occupied space to colony strength without removing needed brood or food.
- Ask a mentor about cleaning or replacing the affected material after ruling out contagious brood disease.
Avoid this mistake
Do not spray bleach or fungicide on occupied comb or put moldy harvest comb into food production.
Causes, prevention and follow-up
Common causes
Damp storage, leaking equipment, condensation or insufficient bees to occupy space.
Check the result
After correcting the source, check for new growth at the next safe inspection or storage check. Continuing spread means moisture or colony weakness remains.
Prevent it happening again
Store comb dry and protected and inspect winter moisture conditions.
When to get help
Seek an inspector for uncertain brood disease and extensive unexplained decline.
Supplies and their limits
No routine mold cure product is recommended; drying, repair and cause assessment come first.
Sources and review notes
- Illinois Extension, prepare your bees for winter
- Washington State Extension, colonies that fail to overwinter
- UF/IFAS, wax moth control
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Overheating, heat stress or softening comb
Extreme distress, blocked ventilation, dead bees during heat or softened collapsing comb.
Act promptly; severe heat can be urgent
Heat becomes dangerous when bees cannot regulate the colony or comb begins to fail. Normal bearding alone is not proof of overheating.
Compare additional reference photographs
Look for actual heat related evidence such as softening comb, then compare water access, airflow and weather. Normal bearding alone does not demonstrate heat injury. Open The BeeMD reference for heat stress (new tab).
Recognize the signs
Extreme distress, blocked ventilation, dead bees during heat or softened collapsing comb.
What else can look similar?
Normal fanning and bearding can occur without damage. Chemical exposure also causes distressed bees.
Inspect and confirm
Wear protection and observe from the side. Check forecast, access to water and whether an entrance or transport screen is mistakenly closed. Avoid lifting soft heavy comb.
Restore an accidentally blocked safe ventilation path immediately.
Take action
- Restore an accidentally blocked safe ventilation path immediately.
- Provide accessible clean water with landing surfaces and safe site shade where practical.
- Get help for comb collapse or transport emergencies; keep boxes stable and avoid trapping the colony while making changes.
Avoid this mistake
Do not pour water inside, spray chemicals or tear apart soft comb in the hottest conditions.
Causes, prevention and follow-up
Common causes
Closed entrances, transport, direct severe heat, lack of water or unsuitable equipment arrangement.
Check the result
Observe over the next hours. Continued distress, mortality or sagging comb requires immediate experienced assistance.
Prevent it happening again
Plan water and ventilation before heat or movement; follow treatment temperature restrictions.
When to get help
Contact a mentor promptly for collapsing comb or a sealed overheating colony.
Supplies and their limits
Safe water and correcting a closed entrance may resolve the immediate issue. Ventilation products must fit the hive and climate.
Sources and review notes
- University of Georgia Bee Program, noninfectious disorders and pests
- Penn State Extension, honey bee management throughout the seasons
- Michigan State Extension, hot weather advice
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Inadequate or excessive ventilation
Blocked openings, recurring moisture or heat distress; excessive drafts may also chill a small cluster.
Open the visual identification guideOpening a hive in cold or unsuitable weather
Brood exposed while few bees cover it, falling temperatures or bees unable to return after handling.
Avoid unnecessary opening; act only on a defined need
Long inspections can chill brood and make it hard for bees to regroup. Weather, wind and colony size matter more than a single universal temperature.
Compare additional reference photographs
Compare chilled brood at the margins with healthier central brood. Record weather, inspection duration and the number of adult bees covering developing bees. Open The BeeMD reference for chilled brood (new tab).
Recognize the signs
Brood exposed while few bees cover it, falling temperatures or bees unable to return after handling.
What else can look similar?
A brief emergency food check differs from a full brood inspection; avoiding all winter checks can also miss starvation.
Inspect and confirm
Use a forecast, inspection plan and prepared equipment. Decide whether an external observation or quick top food check can answer the question.
Delay routine frame inspection until favorable local conditions.
Take action
- Delay routine frame inspection until favorable local conditions.
- For urgent food access, prepare the feed and method first and minimize exposed time.
- Keep brood frames together and return them in original order; close promptly.
Avoid this mistake
Do not shake or spread brood in cold wind, or open repeatedly to look for a queen.
Causes, prevention and follow-up
Common causes
An inspection without a clear purpose, spreading brood frames or exposing a weak colony.
Check the result
At the next suitable inspection check whether remaining brood is covered and new larvae look normal. Chilled or discolored brood needs comparison and possibly testing.
Prevent it happening again
Prepare a checklist and all tools before opening and work with a mentor in the first season.
When to get help
Get local help when an emergency cannot wait for warmer weather.
Supplies and their limits
No special gadget makes a long cold inspection harmless. Preparation and timing are the main tools.
Sources and review notes
- University of Georgia Bee Program, noninfectious disorders and pests
- Illinois Extension, prepare your bees for winter
- Penn State Extension, honey bee management throughout the seasons
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Drought and lack of water or forage
Falling weight, drying water sources, little nectar and increased robbing pressure.
Monitor stores and water closely
Drought can reduce nectar even where flowers remain visible. Colonies may need food assessment and a reliable water source.
View the drought and lack of water or forage reference photo above.
Recognize the signs
Falling weight, drying water sources, little nectar and increased robbing pressure.
What else can look similar?
Busy flight does not prove a flow; poor colony growth also has queen or disease causes.
Inspect and confirm
Use local weather, bloom observations and hive food records. In suitable conditions assess actual nectar and reserves rather than guessing from flowers.
Provide a dependable shallow water source with stones or floats.
Take action
- Provide a dependable shallow water source with stones or floats.
- Protect remaining stores and use the dearth feeding guide when reserves warrant.
- Keep exposed feed and honey covered to limit robbing.
Avoid this mistake
Do not assume newly planted flowers solve an immediate shortage or leave drowning hazards in deep open water.
Causes, prevention and follow-up
Common causes
Low rainfall, heat and reduced flowering or nectar secretion.
Check the result
Check water daily in heat and food at intervals suited to colony size and reserve levels. Continued decline needs a full health review.
Prevent it happening again
Plan water before summer and develop varied forage suited to local rainfall.
When to get help
Ask local keepers about drought conditions and help with very light colonies.
Supplies and their limits
A hive top feeder provides internal feed access. Choose the actual 8 or 10 frame width, use all floats and required parts, test for leaks and follow cleaning instructions. It does not cure disease and liquid uptake depends on weather. Use an existing sound compatible feeder when possible. Remove sale honey supers from the feeding plan.
Little LaRue supplies use our own checkout.
View Little LaRue hive top feedersSources and review notes
- Penn State Extension, honey bee management throughout the seasons
- UF/IFAS, robbing behavior in honey bees
- University of Georgia Bee Program, noninfectious disorders and pests
- Michigan State Extension, hot weather advice
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Flooded apiary or water contaminated equipment
Submerged entrances, displaced boxes, silt or water in comb and storage containers.
Seek assistance; human safety comes first
Floodwater can drown colonies and contaminate equipment and honey. Do not enter moving water to retrieve hives.
Recognize the signs
Submerged entrances, displaced boxes, silt or water in comb and storage containers.
What else can look similar?
Internal condensation does not carry the same contamination concern as floodwater. Do not judge food safety by appearance alone.
Inspect and confirm
When safe, use protection and photographs to record water level, affected frames, hive positions and any live cluster. Keep flood exposed food separate.
Keep people and animals away from unstable or contaminated flood sites.
Take action
- Keep people and animals away from unstable or contaminated flood sites.
- With experienced help, recover live colonies only once access is safe and choose higher stable ground.
- Ask food safety and apiary authorities about disposal or reuse of exposed honey and equipment.
Avoid this mistake
Do not sell flood exposed honey, wash it back into a food batch, or reuse suspect comb without advice.
Causes, prevention and follow-up
Common causes
Low ground, overflowing waterways, drainage failure or storm surge.
Check the result
Reassess survivors, food and brood promptly after safe recovery. Contamination decisions must precede reuse or harvest.
Prevent it happening again
Use high drained sites and an evacuation plan for flood prone yards.
When to get help
Use emergency services for immediate danger and local extension or inspectors for recovery.
Supplies and their limits
A new stand cannot make contaminated honey safe. Site planning and professional assessment come first.
Sources and review notes
- NSW Department of Primary Industries, floods and beekeeping
- Apiary Inspectors of America, state inspection service directory
- FAO, honey properties, moisture and processing
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Wind damage and overturned hive boxes
Lids blown off, shifted boxes, rain entry or fallen stands after wind.
Act promptly once conditions are safe
A displaced lid or stack exposes bees, brood and food. Stabilize the site with help and preserve frame order where possible.
Compare additional reference photographs
Compare displaced boxes, covers and stands before disturbing the site. Check for trapped bees, exposed brood and ongoing instability before recovery. Open The BeeMD reference for toppled hives (new tab).
Recognize the signs
Lids blown off, shifted boxes, rain entry or fallen stands after wind.
What else can look similar?
Bear damage and vandalism can also overturn hives; record tracks and timing before concluding wind.
Inspect and confirm
Wear full protection and check overhead hazards and unstable ground first. Photograph the arrangement and inspect boxes for cracks before lifting.
Keep people clear and wait until the site is safe.
Take action
- Keep people clear and wait until the site is safe.
- With a helper, restore upright boxes and cover exposed brood without crushing bees or the queen.
- Repair stand stability and use an appropriate hive strap or anchoring arrangement. Assess food and injury afterward.
Avoid this mistake
Do not work under damaged trees or lift heavy unstable stacks alone.
Causes, prevention and follow-up
Common causes
Exposed sites, unstable stands, unsecured equipment or storm debris.
Check the result
Check promptly after the weather passes, then at the next suitable brood inspection. Water entry or abnormal brood needs further assessment.
Prevent it happening again
Secure sound equipment and inspect straps and stands before storms.
When to get help
Seek help for heavy stacks, damaged trees or badly disrupted colonies.
Supplies and their limits
A correctly sized hive strap is prevention, not a repair for rotten stands. Existing sound anchoring may suffice.
Sources and review notes
- Penn State Extension, honey bee management throughout the seasons
- Washington State Extension, colonies that fail to overwinter
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Sudden bee deaths or suspected pesticide exposure
Unexpected piles of recently dead bees, abnormal movement or several colonies affected over a short time.
Contact the regulator promptly; evidence is time sensitive
A sudden unusual loss deserves investigation. Dead or trembling bees do not on their own prove poisoning or identify a chemical.
Dead bees at an entrance do not establish pesticide exposure. Use the investigation example to document observations while promptly contacting the pesticide regulator for sampling instructions. View the death-investigation example.
Compare additional reference photographs
The reference photographs show evidence that can prompt an exposure investigation. Dead or trembling bees have several possible causes; preserve samples as the regulator directs. Open The BeeMD reference for pesticide poisoning (new tab).
Recognize the signs
Unexpected piles of recently dead bees, abnormal movement or several colonies affected over a short time.
What else can look similar?
Normal gradual worker mortality differs from a sudden event. Varroa and nutrition problems can coexist with an exposure.
Inspect and confirm
Use photographs and video, dated colony records, weather and recent nearby activity. Contact the investigating agency before collecting samples; pesticide residue samples are handled differently from routine disease samples.
Keep people and pets away from suspect spills or exposure.
Take action
- Keep people and pets away from suspect spills or exposure.
- Contact your state pesticide regulator and apiary inspector promptly; record onset and affected colonies.
- Follow their collection, storage and shipping directions and preserve feed, honey and treatment records. Do not discard evidence first.
Avoid this mistake
Do not accuse a neighbor from a photograph, feed suspect honey to other colonies, or place residue samples in alcohol unless the investigator specifically directs it.
Causes, prevention and follow-up
Common causes
Possible pesticide exposure, starvation, viruses, weather or other acute stresses.
Check the result
Track losses and survivors daily while the investigation proceeds. Further treatment or movement should follow professional advice.
Prevent it happening again
Maintain apiary registration and communication with nearby growers; follow all in hive treatment labels.
When to get help
In Ohio use the ODA pesticide program and apiary contacts linked in the Help Center; ask the regulator about current reporting procedures.
Supplies and their limits
No purchased cure reverses an unknown exposure. Prompt evidence collection and official investigation are the useful response.
Sources and review notes
- US EPA, reporting bee kills and locating state reporting assistance
- Michigan State Extension, responding to suspected pesticide harm
- Apiary Inspectors of America, state inspection service directory
Reviewed November 19, 2026. Adapt timing to local climate, weather and colony condition. A photograph or symptom list does not confirm a diagnosis.
Explore the expanded visual atlas

For the love of the bees.
The more you notice, the more there is to love. Explore practical guides to colony life, hive inspections and your first season of beekeeping.
Spend a little time in the hive