Honey Extraction, Bottling and Clean Equipment

Honey processing

Uncap, extract, strain and bottle

Before you start

Photographs show separate documented examples, including the DHS and DC Beekeepers Alliance event photographed by Tia Dufour in June 2023. Check representative honey moisture with a suitable calibrated honey refractometer; this measurement is not pictured.

  1. Step 1

    Keep harvested supers protected

    Full honey supers with some brace comb between boxes

    These supers contain full honey frames. Before removing a crop, leave adequate colony stores, check the honey is suitable for harvest and follow any treatment-label restrictions.

    Enlarge photograph
    Photo credit and source

    Courtesy The Animal and Plant Health Agency (APHA), Crown Copyright · Open Government Licence v3.0.

    Original source and licensing record

    Displayed responsively. See the source record for the original photograph and any existing annotations.

  2. Step 2

    Organize the frames at the work area

    Wooden frame top bars and wax in honey supers at the processing area

    The photograph shows stacked frame top bars and wax. Keep the processing area clean, exclude insects and protect food-contact surfaces. A photographed event does not by itself establish a food-safety standard.

    Enlarge photograph
    Photo credit and source

    DHSgov · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  3. Step 3

    Uncap a supported comb face

    Knife removing wax cappings from a honey frame above a catching tray

    The knife is removing the wax surface above a catching tray. Support the frame securely, keep fingers out of the blade path and follow the tool manufacturer’s heating and handling instructions.

    Enlarge photograph
    Photo credit and source

    Tia Dufour / U.S. Department of Homeland Security · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  4. Step 4

    Open caps missed by the knife

    Uncapping fork opening wax cappings on a supported honey frame

    The uncapping fork reaches low areas of comb. Work carefully to avoid gouging deep into the cells or injuring the supporting hand. The goal is to open sealed honey cells.

    Enlarge photograph
    Photo credit and source

    Tia Dufour / U.S. Department of Homeland Security · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  5. Step 5

    Inspect the empty extractor

    View inside a clean Honey Extractor

    Identify the cage and central drive. Before loading, verify the extractor is clean, dry, stable and suitable for the frame size. Keep electrical components dry where applicable.

    Enlarge photograph
    Photo credit and source

    Courtesy The Animal and Plant Health Agency (APHA), Crown Copyright · Open Government Licence v3.0.

    Original source and licensing record

    Displayed responsively. See the source record for the original photograph and any existing annotations.

  6. Step 6

    Place frames in the correct holders

    Overhead view of a honey frame being positioned in a hand-driven extractor

    This overhead view shows a frame being positioned in a hand-driven extractor. Follow the extractor’s directions for orientation and balanced loading. Keep the drive stopped while reaching inside.

    Enlarge photograph
    Photo credit and source

    DHSgov · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  7. Step 7

    Operate with the lid closed

    People operating a closed hand-driven honey extractor

    The event photograph shows use of the hand crank with the extractor closed. Keep hands, hair and clothing away from moving parts. Start and stop as the equipment instructions require.

    Enlarge photograph
    Photo credit and source

    DHSgov · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  8. Step 8

    Wait for a complete stop before unloading

    Honey frames being lifted above an open extractor

    This photograph shows frames being handled above the extractor. Stop and isolate the drive before removing frames. Inspect comb for damage before deciding how it should be returned or stored.

    Enlarge photograph
    Photo credit and source

    DHSgov · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  9. Step 9

    Strain into a clean receiving container

    Extracted honey flowing from a gate into a strainer over a receiving container

    Honey flows through a strainer, which removes larger wax fragments. Straining is not sterilization or a remedy for fermented or contaminated honey. Keep the container covered when practicable.

    Enlarge photograph
    Photo credit and source

    Tia Dufour / U.S. Department of Homeland Security · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  10. Step 10

    Fill clean dry food-grade containers

    Honey flowing from a honey gate into a small container

    The photograph shows controlled filling from a honey gate. Let honey settle as appropriate, keep water out, close containers and record the batch. Wash hands and maintain appropriate clothing and hair restraint throughout food handling.

    Enlarge photograph
    Photo credit and source

    Tia Dufour / U.S. Department of Homeland Security · Public domain.

    Original source and licensing record

    Display copy resized and compressed; no subject or symptom alteration.

  11. Step 11

    Inspect the finished containers

    Prepared Honey Jars (creamed and liquid)

    The source shows liquid and creamed honey. Check closures, labeling, batch identity and dry storage conditions. Do not give honey to infants younger than twelve months.

    Enlarge photograph
    Photo credit and source

    Courtesy The Animal and Plant Health Agency (APHA), Crown Copyright · Open Government Licence v3.0.

    Original source and licensing record

    Displayed responsively. See the source record for the original photograph and any existing annotations.

Finish and follow up

Clean and dry equipment according to its instructions, keep processing records and follow applicable Ohio food and labeling requirements. Return or store drawn comb using an appropriate pest-prevention plan. These photographs illustrate the physical operations, not commercial certification of the photographed room.

Lesson overview

A safe harvest begins with suitable surplus honey and continues through clean extraction and storage. The photographs show equipment and outcomes; missing action views are not replaced with unrelated images.

Written checklist and additional actions
  1. PrepareClean, rinse where appropriate and dry food-contact surfaces and containers.
  2. Check the harvestConfirm adequate colony stores and measure representative honey moisture.
  3. Remove bees by a suitable methodProtect the queen and brood and keep removed supers covered.
  4. Uncap and extractFollow equipment instructions; keep hands clear of moving parts.
  5. Strain and settleCover the honey and avoid introducing water or contaminants.
  6. Bottle and recordUse dry food-grade containers, suitable labels and a traceable batch record.
Confirm surplus and readiness

Leave adequate colony food. Capped honey is a useful sign but does not guarantee moisture. Sample representative honey with a calibrated honey refractometer and account for variation across frames.

Separate uncapping and extraction

Uncapping opens wax-covered storage cells. An extractor spins honey out of supported frames. The clean machine photograph shows the equipment, not an operating sequence or a claim about a specific model.

Keep the honey room clean

Use food-contact equipment, potable water for cleaning and a plan that keeps water out of the honey. Keep bees, pests, chemicals and dirt away from exposed honey.

Use the machine safely

Follow the manufacturer’s loading, balancing and operating instructions. Stop moving parts before reaching inside. Never defeat a safety interlock.

Strain, settle and bottle

Straining removes wax pieces and debris; settling can reduce entrained air. Use clean dry containers and protect the honey from humidity. Crystallization is normal and does not by itself indicate spoilage.

Label and store responsibly

Record batches, store sealed containers in a clean dry place and follow applicable food labeling requirements. Honey must not be fed to infants under 12 months.

Check your understanding

Explain why a photograph of capped honey cannot replace a moisture measurement or establish food safety.

Scientific references and further study

Photograph sources document the pictured examples. U.S. management and pesticide decisions require current local guidance and the exact product label. No institution listed here endorses this store.

Honey bees on a wooden frame during an open Langstroth hive inspection.

For the love of the bees.

The more you notice, the more there is to love. Explore practical guides to colony life, hive inspections and your first season of beekeeping.

Spend a little time in the hive